When talking about work related to oil and gas projects, especially in the piping system section, then terms such as strainer, vent, drain, and steam trap will certainly be often encountered. This time it will be discussed about the strainer section or also known as the Y Strainer Malaysia.

What Exactly is Y Strainer Malaysia?

A strainer is a device that can separate debris from a stream, so that the debris does not enter the system or mechanical equipment. Because in general the flow in a piping system is not always clean, whether it is a liquid or gas.

There is usually a chance that the fluid will mix with solids or debris which can damage mechanical devices and systems. That’s why the valve strainer or valve strainer has an important role here. With these components, the system and mechanical equipment such as pumps and so on will be maintained.

The term Y strainer Malaysia valve itself is pinned because the shape of the component does resemble the letter Y. Where this part of the piping is specifically designed as a tool to separate foreign objects that participate in the flow. The foreign objects that are most often found are corrosion, scale, weld metal, joint compounds, or other solid objects.

How Does Y Strainer Malaysia Work?

The presence of a strainer on the valve causes the water that is sucked into the pipe to be filtered. Even a strainer will keep dirt from accumulating in the fire hydrant system that has entered the stream. Because it is feared that dirt particles would cause harm to the network in the piping system. The filtration foot is positioned on the main pipe at an angle to the Y strainer Malaysia to accomplish this task. 

This component is typically used in high-pressure pipes. According to the definition and function of the strainer valve, the valve can be positioned horizontally or vertically, with the filtration portion pointing downwards.

As a result, subsequent solid material or particles filtered by the strainer will congregate at the mesh filter’s bottom point. Following that, the gathered particles will be cleansed on a regular basis. There is also a strainer valve with a blow-off connection to allow for automatic particle cleaning.

How to Maintain Y Strainer Malaysia?

Before cleaning, always reduce the pressure in the pipe where the filter is attached. By removing the bushing plug and cover bolt, the filter can be cleaned. The screen will then release dirty materials.

Large strainers can be accessed by opening the cover. The filter can then be cleaned and repaired by brushing and spraying it with water. Cleaning the screen filter on a regular basis is highly suggested to avoid clogging.

Y type strainers are typically equipped with a pressure gauge that is positioned before and after the strainer to make it easier to determine the change in pressure. This might aid in the establishment of a regular maintenance programme for screen filter cleaning. Allowing the adhering debris to solidify on the filter can make cleaning more difficult.